Blog

Epson SX210 Reset Waste Ink Counter

  • Auteur/autrice de la publication :
  • Commentaires de la publication :0 commentaire
Fix Epson SX210 Service Required – Waste Counter Reset

Epson SX210 Waste Ink Counter Reset

When the Epson SX210 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX210 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX210 Show ‘Service Required’?

Most Epson SX210 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson SX210 Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX210 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson SX210.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson SX210.
Buy Wic Reset Key

Most Epson SX210 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson SX210 – Waste Ink Counter Reset using Wic Reset Connect.

Laisser un commentaire