Epson Photo 1500W Waste Ink Counter Reset
If your Epson Photo 1500W suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
The Epson Photo 1500W tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why the Epson Photo 1500W Stops Printing (Waste Counter Limit)
Most Epson Photo 1500W waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.
Common Symptoms
- Printer refuses to print even with ink available
- Epson Status Monitor shows maintenance warning
- Blinking lights and blocked jobs
- Device is locked until reset is performed
Step-by-Step: Epson Photo 1500W Waste Counter Reset
- Step 1: Connect Epson Photo 1500W to a Windows computer with a stable Internet connection using a USB cable.
- Step 2: Run Wic Reset Connect as Administrator and confirm Epson Photo 1500W is detected.
- Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson Photo 1500W.
Most Epson Photo 1500W waste counter resets finish in ~1–2 minutes.
System Requirements
- Valid Wic Reset Connect reset key
- Stable Internet connection during reset
- USB connection required (Wi-Fi reset not supported)
- Windows 7/8/10/11 PC
Frequently Asked Questions
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Guide prepared for Epson Photo 1500W – Waste Ink Counter Reset using Wic Reset Connect.
English 
Deutsch 
Italiano 
Français 
Українська 
Română 
Español 
Magyar 
Български