Blog

Epson L559 Reset Waste Ink Counter

  • Auteur/autrice de la publication :
  • Commentaires de la publication :0 commentaire
Epson L559 Waste Ink Counter Reset

Epson L559 Waste Ink Counter Reset

The Epson L559 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L559 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L559 Waste Ink Counter

Most Epson L559 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson L559 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Connect Epson L559 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L559 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L559.
Buy Wic Reset Key

Most Epson L559 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L559 – Waste Ink Counter Reset using Wic Reset Connect.

Laisser un commentaire