Blog

Epson L120 Reset Waste Ink Counter

  • Auteur/autrice de la publication :
  • Commentaires de la publication :0 commentaire
Fix Epson L120 Service Required – Waste Counter Reset

Epson L120 Waste Ink Counter Reset

The Epson L120 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L120 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson L120 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson L120 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Three Steps to Restore Epson L120 Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L120 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson L120 is detected.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L120.
Buy Wic Reset Key

Most Epson L120 waste counter resets finish in ~1–2 minutes.

FAQ

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson L120 – Waste Ink Counter Reset using Wic Reset Connect.

Laisser un commentaire