Epson CX4900 Reset Waste Ink Counter

  • Auteur/autrice de la publication :
  • Commentaires de la publication :0 commentaire
Epson CX4900 Ink Pad Counter Reset Guide

Epson CX4900 Waste Ink Counter Reset

The Epson CX4900 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson CX4900 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson CX4900 Show ‘Service Required’?

Most Epson CX4900 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson CX4900 Waste Counter Reset

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson CX4900 directly. Keep Internet enabled for validation.
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson CX4900 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson CX4900 to finalize.

Most Epson CX4900 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson CX4900 – Waste Ink Counter Reset using Wic Reset Connect.

Laisser un commentaire