Blog

Epson SX235W Reset Waste Ink Counter

Epson SX235W Waste Ink Counter Reset

Epson SX235W Waste Ink Counter Reset

The Epson SX235W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson SX235W tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson SX235W Show ‘Service Required’?

Most Epson SX235W waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson SX235W Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson SX235W via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson SX235W appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson SX235W.
Buy Wic Reset Key

Most Epson SX235W waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).
  • Try another USB cable (some cables are charge-only).

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson SX235W – Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply