Blog

Epson NX220 Reset Waste Ink Counter

Epson NX220 Waste Ink Counter Reset

Epson NX220 Waste Ink Counter Reset

The Epson NX220 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX220 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson NX220 Stops Printing (Waste Counter Limit)

Most Epson NX220 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Typical Signs

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson NX220 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX220 via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson NX220 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson NX220.
Buy Wic Reset Key

Most Epson NX220 waste counter resets finish in ~1–2 minutes.

What You Need

  • Valid Wic Reset Connect reset key
  • Windows 7/8/10/11 PC
  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson NX220 – Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply