Blog

Epson ET-2856 Reset Waste Ink Counter

Epson ET-2856 Ink Pad Counter Reset Guide

Epson ET-2856 Waste Ink Counter Reset

The Epson ET-2856 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson ET-2856 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson ET-2856 Stops Printing (Waste Counter Limit)

Most Epson ET-2856 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson ET-2856 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson ET-2856 via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2856 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson ET-2856.
Buy Wic Reset Key

Most Epson ET-2856 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson ET-2856 – Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply