Blog

Canon MB5470 Ink Absorber Full Reset

MB5470 Waste Ink Counter Reset (Canon Printers)

Canon MB5470 Ink Absorber Full Reset

Canon MB5470 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.

Inside Canon printers, absorber pads collect excess ink from cleaning and maintenance cycles. The printer uses an internal counter to estimate pad saturation.

This page is prepared for Canon MB5470. Service mode instructions are shown only when a matching series procedure is known.

Reset the Ink Absorber Counter

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Before You Continue

Resetting the counter does not physically clean the absorber pads. For heavy usage, pads may eventually need cleaning or replacement.

Need a reset solution?

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

For best results, avoid rushing button presses—consistent timing matters.

Common Fixes

  • Try a different USB cable/port if using PC software.
  • Close other Canon printer utilities while resetting.
  • Power-cycle the printer and try again.
  • Use the correct Stop/Reset press count for your series.
  • Repeat the service mode steps carefully (timing matters).

Frequently Asked Questions

Does every Canon model need service mode?
No. The generator shows service mode steps only when the series procedure is known.
Does reset clean the absorber pads?
No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.
How many times should I press Stop/Reset?
It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.
How long does it take?
Usually a few minutes once the correct steps are followed.

Guide prepared for Canon MB5470 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply