Blog

Canon iP4990 Ink Absorber Full Reset

iP4990 Printer Reset – Ink Absorber Counter Explained

Canon iP4990 Ink Absorber Full Reset

Canon iP4990 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.

Inside Canon printers, absorber pads collect excess ink from cleaning and maintenance cycles. The printer uses an internal counter to estimate pad saturation.

This page is prepared for Canon iP4990. Service mode instructions are shown only when a matching series procedure is known.

Perform the Waste Ink Counter Reset

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Warnings

If absorber pads are truly saturated, ignoring maintenance can lead to ink leakage inside the printer. The counter reset only removes the software lock.

Need a reset solution?

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

For best results, avoid rushing button presses—consistent timing matters.

Common Fixes

  • Close other Canon printer utilities while resetting.
  • Try a different USB cable/port if using PC software.
  • Use the correct Stop/Reset press count for your series.
  • Repeat the service mode steps carefully (timing matters).
  • Power-cycle the printer and try again.

FAQ

How many times should I press Stop/Reset?
It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.
Does reset clean the absorber pads?
No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.
Does every Canon model need service mode?
No. The generator shows service mode steps only when the series procedure is known.
How long does it take?
Usually a few minutes once the correct steps are followed.

Guide prepared for Canon iP4990 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply