Blog

Epson XP-100 Reset Waste Ink Counter

How to Reset Epson XP-100 Waste Ink Counter

Epson XP-100 Waste Ink Counter Reset

If your Epson XP-100 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-100 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-100 Stops Printing (Waste Counter Limit)

Most Epson XP-100 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson XP-100 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-100 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-100.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-100.
Buy Wic Reset Key

Most Epson XP-100 waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson XP-100 – Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply