Blog

Epson NX410 Reset Waste Ink Counter

Epson NX410 Waste Ink Counter Reset

Epson NX410 Waste Ink Counter Reset

The Epson NX410 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson NX410 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson NX410 Stops Printing (Waste Counter Limit)

Most Epson NX410 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson NX410 Printing

  1. Step 1: Connect Epson NX410 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson NX410.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson NX410 to finalize.
Buy Wic Reset Key

Most Epson NX410 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Restart printer and PC, then try again.
  • Use a direct USB connection (avoid hubs).
  • Run the app as Administrator.
  • Close Epson Status Monitor or other printer utilities.
  • Try another USB cable (some cables are charge-only).

Frequently Asked Questions

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson NX410 – Waste Ink Counter Reset using Wic Reset Connect.

Leave a Reply