Блог

Epson XP-445 Reset Waste Ink Counter

Reset Epson XP-445 Waste Ink Counter in Minutes

Epson XP-445 Waste Ink Counter Reset

If your Epson XP-445 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

The Epson XP-445 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

What Causes the Epson XP-445 Ink Pad Counter Warning?

Most Epson XP-445 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Step-by-Step: Epson XP-445 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-445 via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson XP-445 is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-445 to finalize.
Buy Wic Reset Key

Most Epson XP-445 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • USB connection required (Wi-Fi reset not supported)
  • Stable Internet connection during reset
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-445 – Waste Ink Counter Reset using Wic Reset Connect.

Залишити відповідь