Блог

Epson WF-2631 Reset Waste Ink Counter

Reset Epson WF-2631 Waste Ink Counter in Minutes

Epson WF-2631 Waste Ink Counter Reset

The Epson WF-2631 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2631 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson WF-2631 Ink Pad Counter Warning?

Most Epson WF-2631 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson WF-2631 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2631 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson WF-2631.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson WF-2631 to finalize.
Buy Wic Reset Key

Most Epson WF-2631 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Stable Internet connection during reset
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Valid Wic Reset Connect reset key

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson WF-2631 – Waste Ink Counter Reset using Wic Reset Connect.

Залишити відповідь