Blog

Epson XP-240 Reset Waste Ink Counter

Epson XP-240 Ink Pad Counter Reset Guide

Epson XP-240 Waste Ink Counter Reset

The Epson XP-240 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-240 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-240 Stops Printing (Waste Counter Limit)

Most Epson XP-240 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Step-by-Step: Epson XP-240 Waste Counter Reset

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-240 via USB (Wi-Fi reset is not supported).
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson XP-240.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson XP-240 to finalize.
Buy Wic Reset Key

Most Epson XP-240 waste counter resets finish in ~1–2 minutes.

Before You Begin

  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson XP-240 – Waste Ink Counter Reset using Wic Reset Connect.

Lasă un răspuns