Blog

Epson L3280 Reset Waste Ink Counter

Epson L3280 Waste Ink Counter Reset

Epson L3280 Waste Ink Counter Reset

The Epson L3280 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson L3280 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson L3280 Waste Ink Counter

Most Epson L3280 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Three Steps to Restore Epson L3280 Printing

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson L3280 via USB (Wi-Fi reset is not supported).
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3280 appears in the device list.
  3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3280.
Buy Wic Reset Key

Most Epson L3280 waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Use a direct USB connection (avoid hubs).
  • Close Epson Status Monitor or other printer utilities.

FAQ

Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson L3280 – Waste Ink Counter Reset using Wic Reset Connect.

Vélemény, hozzászólás?