The Epson L3100 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson L3100 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson L3100 Waste Ink Counter

With Wic Reset Connect, you can reset the Epson L3100 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Three Steps to Restore Epson L3100 Printing

1. Step 1: Connect Epson L3100 to a Windows computer with a stable Internet connection using a USB cable.
2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson L3100 appears in the device list.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson L3100.

Most Epson L3100 waste counter resets finish in ~1–2 minutes.

What You Need

• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key

If the Printer Is Not Detected

• Restart printer and PC, then try again.
• Temporarily disable VPN/proxy if validation fails.
• Try another USB cable (some cables are charge-only).
• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.

FAQ