Blog

Epson K201 Reset Waste Ink Counter

Epson K201 Ink Pad Counter Reset Guide

Epson K201 Waste Ink Counter Reset

The Epson K201 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson K201 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Understanding the Epson K201 Waste Ink Counter

Most Epson K201 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson K201 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Prepare a Windows PC + USB cable and connect Epson K201 directly. Keep Internet enabled for validation.
  2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson K201.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson K201 to finalize.
Buy Wic Reset Key

Most Epson K201 waste counter resets finish in ~1–2 minutes.

What You Need

  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC
  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.

Guide prepared for Epson K201 – Waste Ink Counter Reset using Wic Reset Connect.

Vélemény, hozzászólás?