Blog

Epson EP-708A Reset Waste Ink Counter

Reset Epson EP-708A Waste Ink Counter in Minutes

Epson EP-708A Waste Ink Counter Reset

When the Epson EP-708A reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson EP-708A uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson EP-708A Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson EP-708A waste counter reset in minutes.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson EP-708A Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson EP-708A via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson EP-708A is detected.
  3. Step 3: Use the key to reset the counter, wait for completion, then restart Epson EP-708A to finalize.
Buy Wic Reset Key

Most Epson EP-708A waste counter resets finish in ~1–2 minutes.

Frequently Asked Questions

What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson EP-708A – Waste Ink Counter Reset using Wic Reset Connect.

Vélemény, hozzászólás?