The Epson SX430W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson SX430W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson SX430W Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson SX430W waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

• ‘Service Required’ / service life message in driver or utility
• Maintenance/support code (varies by model/driver)
• Printing stops after cleaning cycles
• Warning repeats after restarting the printer

Three Steps to Restore Epson SX430W Printing

1. Step 1: Prepare a Windows PC + USB cable and connect Epson SX430W directly. Keep Internet enabled for validation.
2. Step 2: Open Wic Reset Connect with admin privileges and verify device recognition for Epson SX430W.
3. Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson SX430W.

Most Epson SX430W waste counter resets finish in ~1–2 minutes.

What You Need

• Valid Wic Reset Connect reset key
• Stable Internet connection during reset
• USB connection required (Wi-Fi reset not supported)
• Windows 7/8/10/11 PC

If the Printer Is Not Detected

• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.

FAQ