Blog

Epson B40W Reset Waste Ink Counter

Fix Epson B40W Service Required – Waste Counter Reset

Epson B40W Waste Ink Counter Reset

The Epson B40W is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson B40W accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson B40W Ink Pad Counter Warning?

Most Epson B40W waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Common Symptoms

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson B40W Ink Pad Counter Reset – Quick Steps

  1. Step 1: Use a Windows PC (7–11) with Internet access. Connect Epson B40W via USB (Wi-Fi reset is not supported).
  2. Step 2: Run Wic Reset Connect as Administrator and confirm Epson B40W is detected.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson B40W.
Buy Wic Reset Key

Most Epson B40W waste counter resets finish in ~1–2 minutes.

Common Fixes

  • Close Epson Status Monitor or other printer utilities.
  • Run the app as Administrator.
  • Use a direct USB connection (avoid hubs).
  • Restart printer and PC, then try again.
  • Try another USB cable (some cables are charge-only).

FAQ

How long does it take?
Usually about 1–2 minutes.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson B40W – Waste Ink Counter Reset using Wic Reset Connect.

Deja una respuesta