Blog

Epson XP-302 Reset Waste Ink Counter

How to Reset Epson XP-302 Waste Ink Counter

Epson XP-302 Waste Ink Counter Reset

If your Epson XP-302 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-302 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson XP-302 Ink Pad Counter Warning?

Most Epson XP-302 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Epson XP-302 Ink Pad Counter Reset – Quick Steps

  1. Step 1: Connect Epson XP-302 to a Windows computer with a stable Internet connection using a USB cable.
  2. Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson XP-302 appears in the device list.
  3. Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-302.
Buy Wic Reset Key

Most Epson XP-302 waste counter resets finish in ~1–2 minutes.

What You Need

  • Stable Internet connection during reset
  • Valid Wic Reset Connect reset key
  • USB connection required (Wi-Fi reset not supported)
  • Windows 7/8/10/11 PC

Frequently Asked Questions

How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.

Guide prepared for Epson XP-302 – Waste Ink Counter Reset using Wic Reset Connect.

Schreibe einen Kommentar